• Download our FREE True Price of Office 365 Whitepaper
  • Give us a call: 877-788-1617

    Stay in the know with the MessageOps newsletter:

    10 Tips to Optimize and Troubleshoot Office 365 Network Connectivity

    Here are our top 10 tips for you to help optimize your Office 365 network performance and prevent future issues.

    Please note that some of these issues, if occurring, will cost you seconds, others more, but by eliminating them all and getting the network ducks in a row, ensuring that you are providing the best possible Office 365 experience for your users.

    Since many of these issues are complex, rather than provide a detailed explanation for each scenario in this blog post, we’ve linked to separate blog posts which cover each in detail as and when you need them.

    Troubleshooting Office 365

    1.TCP Window Scaling

    This tops my list of things to check due to the impact it can have on performance and the amount of times I see it disabled on legacy network equipment. Unfortunately there is no simple way of checking this from a client without taking a network trace but I’ve outlined how to do this, and the setting in much more detail in a separate blog post here

    If you check only one thing on your O365 network link, then we’d advise it’s this!

    2. TCP Idle time settings

    This issue is another very common one and is caused by settings on egress points of corporate networks not being adjusted for Outlook running through it. Problems caused by this can include hangs within Outlook, especially when switching mailboxes/calendars and unexpected auth prompts. It’s relatively easy to fix and I’ve outlined the problem, and solution in much more detail here.

    3.Latency/Round Trip Time (RTT)

    Network latency has the ability to cause real issues with O365 and it’s usability. Checking your RTT to O365 is a worthwhile task regardless of whether you’re having issues as it provides you with a great baseline should performance issues occur in future allowing you to isolate where the delay is occurring.

    The detailed guide on how to do this is here

    4. Proxy Authentication

    On numerous occasions I’ve run into unnecessary delays on connecting to O365 caused by proxy authentication. With Outlook this can cause a delay on start up, when switching mailboxes/calendars etc, anything that requires a new TCP connection to be spun up. With SharePoint this will manifest itself as slow initial page loads.

    The detailed guide on how to check this is here

    5.DNS performance

    A simple one but often forgotten. DNS performance should be checked to ensure it isn’t adding additional delays to your Office 365 connections. A detailed guide to checking DNS performance can be found here.

    6. Proxy Scalability

    This issue can effect both performance and cause issues further down the line when you least expect it. Proxies are invariably in place before the move to Office 365 and are often used without much reconfiguration for the Office 365 traffic. It’s worth checking your numbers here as you may find you’re sailing closer to the wind than you realise.

    The more detailed description of the problem and guidance can be found here

    7.TCP Max Segment size

    A simple one to check but worth a look none the less. To ensure maximum throughput on the link between yourself and Office 365 we should be using as close to as possible the maximum TCP segment size for transferring data.

    More detail on how to check this is here

    8. Selective Acknowledgement

    Whilst you’re digging around in the TCP Options in your 3-way handshake, it’s worth checking Selective Acknowledgement (SACK) is enabled. This feature enables your TCP stack to deal with dropped packets more efficiently.

    A slightly more detailed explanation of SACK and how to check it can be found here.

    9. DNS Geo location

    One of the most important checks you can make, and one that can make a big difference in the performance of O365 is ensuring your DNS call are made in the same geographic location as the user is actually in. Getting this wrong means that the routing of your traffic to O365 could be sub optimal and thus affect performance. It’s thankfully an easy one to check though and outlined further here.

    10.Application Level troubleshooting

    My final tip isn’t so much with network troubleshooting but application layer. This blog post will give you some tips on how to look at Outlook and SharePoint in conjunction with network tracing to both baseline and troubleshoot application level issues even when the traffic is encrypted in an SSL session

    For more information or an assessment email info@messageops.com or visit www.messageops.com.

    Ready to get started? Contact us today to learn more.

    CONTACT US